MarineClean 500 | Biodegradable Marine Hull & Surface Cleaner

Description

MarineClean 500 is a next-generation acid-free marine surface cleaner formulated specifically for boats, yachts, jet skis, marinas, and other seawater-exposed equipment. It removes algae buildup, salt crystallization, biofilms, light rust stains, mineral scaling, and greasy contaminants without harming the environment or surface integrity.

Unlike conventional hull cleaners that contain corrosive acids or chlorine compounds, MarineClean 500 uses a proprietary blend of:

• Citric acid for safe descaling and rust removal

• D-Limonene (citrus terpene) for natural degreasing and fragrance

• Sodium gluconate and citrate as biodegradable chelators

• Non-ionic surfactants (glucoside-based) for lifting organic and oily residues

• And natural film-forming agents for post-cleaning protection

It is 100% free of phosphates, phosphoric acid, hydrochloric acid, and formaldehyde derivatives, making it compliant with global marina and harbor discharge regulations.

MarineClean 500 is safe to use on:

• Gelcoat

• Fiberglass

• Painted aluminum

• Stainless steel

• Epoxy resins

• Chrome hardware

• Plastic trims and rubbers

This makes it ideal for both professional and recreational boat maintenance. The formula is designed to be highly effective while being fully biodegradable, ensuring minimal ecological impact on marine flora and fauna.

Applications:

For Marine Vessels:

• Exterior hull cleaning of yachts, sailboats, motorboats, and jet skis

• Removal of marine growth and slime lines from waterline areas

• Desalting and degreasing of bow, stern, deck and underwater surfaces

• Surface preparation before repainting or applying anti-fouling coatings

• Restoration of shine to oxidized or weathered hulls

• Cleaning of anchors, propellers, ladders, and underwater fittings

For Marinas and Waterfront Facilities:

• Cleaning of boat lifts, slipways, and docking platforms

• Maintenance of ramps, pontoons, buoys, and shore-side structures

• Washdown of salt-encrusted trailers and transport racks

• Cleaning of equipment exposed to seawater mist or brine air

• Suitable for use in harbors with strict runoff regulations

Also Applicable In:

• Coastal resorts and boat rental businesses

• Port maintenance services and shipyards

• Yacht detailing and mobile cleaning professionals

Directions for Use:

1. Dilute the product with water between 1:1 to 1:5, depending on the degree of contamination.

2. Apply directly to the surface using a sprayer, sponge, or brush.

3. Allow to dwell for 5 to 10 minutes without letting it dry.

4. Gently scrub if necessary.

5. Rinse thoroughly with fresh water using a hose or pressure washer.

6. Repeat application for stubborn marine deposits or mineral scale.

Note: Do not use under direct sun to prevent premature drying. Always test on a small area for sensitive surfaces.

Key Features:

• Acid-free, phosphate-free, and chlorine-free

• Over 95% biodegradable according to OECD 301 guidelines

• Safe for all common marine surfaces: fiberglass, gelcoat, epoxy, chrome, etc.

• Removes algae, salt crust, slime lines, rust stains, and greasy deposits

• Non-toxic to fish, plants, and marine ecosystems

• Citrus scent from natural D-Limonene

• Compliant with marina and harbor environmental standards

• Suitable for manual or pressure-assisted cleaning

Storage Conditions:

• Store in original sealed packaging away from sunlight and freezing temperatures

• Ideal storage temperature: +5°C to +30°C (41°F to 86°F)

• Keep out of reach of children and away from incompatible chemicals

Packaging Information:

• 1 L spray bottle

• 5 L jerrycan

• 20 L drum

• 200 L industrial barrel